What is the difference between a force transducer and a load cell?

Force transducers and load cells are based on the same measuring principle – the strain gauge – and convert mechanical forces into electrical signals. The term load cell is predominantly used in weighing and process engineering, while force transducers cover the broader spectrum of force and torque measurement technology: from test benches in the aerospace industry to materials testing. interfaceforce® eK distributes both types in measuring ranges from 0,5 Newtons to 30 Meganewtons.

What types of force transducers does interfaceforce® eK offer?

The portfolio includes low-profile force transducers, S-shaped force transducers, miniature force transducers, measuring bolts, force rings, bending beam load cells, cylindrical high-load sensors, and multi-component transducers for up to 6 degrees of freedom (6DoF). All standard models are strain gauge based and supplied with a calibration certificate. Custom designs are developed according to customer specifications.

Which torque transducers are suitable for rotating applications?

For rotating shafts, torque measuring shafts (e.g., T2, T4, T6, T8, T11, T22, T25) are available, which operate without contact and without slip rings. The measuring ranges extend up to 10 kN·m. For static or reactive applications – such as in test benches or for measuring bolt preload – reaction torque transducers are used. Both variants provide strain gauge-based signals and are compatible with the measuring amplifiers from interfaceforce® eK.

How does the XSENSOR pressure distribution system work and what is it used for?

XSENSOR systems measure surface pressure distribution using ultra-flexible sensor mats in various geometries and resolutions. These imaging systems deliver precise, reproducible results and are used in automotive and medical technology, biomechanics, and point-of-sale applications – for example, for seat pressure analysis, tire contact patch measurement, mattress diagnostics, and wiper testing. The XSENSOR laboratory is accredited according to ISO/IEC 17025 (A2LA).

What measurement accuracy do the force transducers from interfaceforce® eK achieve?

The low-profile force transducers of the Interface series (e.g., 1200, 1201, 3200) typically achieve a total static error band of ≤ 0,02% of the nominal value (full-scale output). The Gold Standard® and Platinum Standard® reference force transducers are suitable for calibration tasks according to ISO 376 Class 0,5. All sensors are supplied with a calibration certificate; A2LA-accredited certificates according to ISO/IEC 17025 are available upon request.

Does interfaceforce® eK also perform calibrations of third-party sensors?

Yes. The calibration laboratory of interfaceforce® eK is ISO/IEC 17025 accredited (A2LA and DAkkS mutually recognized within the framework of the ILAC MRA) and calibrates force measuring devices regardless of the manufacturer. Supported standards: ISO 376, DKD-R 3-3, ASTM E74, VDI/VDE 2624, and custom calibration procedures. Force measuring ranges: 0,5 N to 250 kN (tension and compression). An RMA number will be issued in advance for submissions; the delivery address for calibrations and repairs is c/o SETFLEX, Oppelner Str. 23, 41199 Mönchengladbach, Germany.

How does a calibration process work and how long does it take?

The process begins with an inquiry via contact form or email; interfaceforce® eK promptly issues an RMA number. Upon receipt of the device, calibration is performed in an ISO 17025-accredited laboratory using static tensile and/or compressive force measurements with traceable transfer standards (DAkkS, NIST, or PTB). Calibrations according to ISO 376 or DKD-R 3-3 include multiple load stages in various mounting positions. Turnaround times are short – precise details are available upon request. The completed calibration certificate is internationally recognized.

Which force transducers are suitable for use in ATEX or explosion-hazardous areas?

For hazardous areas (ATEX/IECEx), interfaceforce® eK offers force transducers from the 3400 series as well as hermetically sealed sensor variants made of stainless steel. These models are designed for harsh and potentially explosive environments and deliver reliable measurement results even under continuous operation. For specific hazardous area requirements (Zone 1, Zone 2, etc.), we recommend individual consultation, as suitability depends on the respective device category and the medium being used.

From what quantity are special solutions and customer-specific force transducers available?

Custom designs are available even for single units. interfaceforce® eK develops customer-specific force transducers, torque transducers, and multi-component sensors based on over 25 years of experience and in-house strain gauge manufacturing. Rapid engineering and rapid prototyping enable solutions to be implemented in short lead times – from concept to series production. Application areas range from niche markets with small production runs to OEM integrations in high-volume series.

What distinguishes interfaceforce® eK from other providers in force measurement technology?

interfaceforce® eK has been the exclusive distributor in Germany for Interface Inc. (founded in 1968, Scottsdale, USA) since 1999 – one of the world's leading manufacturers of precision strain gauge-based force transducers. The service portfolio combines American manufacturing quality with local support: an ISO 17025-accredited calibration laboratory in Germany (A2LA/DAkkS, ILAC MRA), manufacturer-independent calibrations and repairs, custom manufacturing starting from a single unit, and exclusive distribution of XSENSOR pressure distribution systems. Measuring ranges from 0,5 Newtons to 30 Meganewtons cover virtually every industrial force measurement application.

What output signal do the force transducers provide, and what measuring amplifier do I need?

Strain gauge-based force transducers deliver a bridge signal of typically 2 mV/V or 4 mV/V at rated load. Further processing requires a measuring amplifier that converts this signal into a usable format – e.g., 0–10 V, 4–20 mA, USB, IO-Link, or digital interfaces. interfaceforce® eK offers suitable measuring amplifiers as complete measurement chains: from simple digital displays (IFFDA93, IFFDA5) and 8-channel data acquisition systems (IFFBX8) to wireless telemetry systems (WTS). Sensors with a TEDS chip also enable automatic parameterization at the measuring amplifier.

What protection ratings (IP classes) are available for the force transducers?

Most standard models are designed for industrial use and achieve protection ratings of IP65 to IP67 (dustproof, protected against water jets and temporary immersion). Hermetically sealed versions made of stainless steel achieve IP68 and are suitable for underwater, cleaning, and outdoor applications under harsh conditions. Certified versions are available for use in potentially explosive atmospheres (ATEX/IECEx). The exact IP rating can be found in each product data sheet; interfaceforce® eK is available upon request to advise on application-specific selection.

How often should a force transducer be recalibrated?

There are no legally mandated intervals; however, ISO 9001, IATF 16949, and industry-standard quality assurance systems recommend annual verification. In practice, the interval depends on the intensity of use, environmental conditions, and the required measurement uncertainty. In safety-critical applications or after mechanical overload events, immediate recalibration is recommended. The interfaceforce laboratory performs manufacturer-independent recalibrations with short turnaround times – even for sensors from other manufacturers.

What is TEDS and what advantages does it offer?

TEDS (Transducer Electronic Data Sheet, IEEE 1451.4) is an electronic data storage device integrated into the sensor or connector that automatically transmits calibration data and sensor characteristics to the measuring amplifier. This eliminates manual input and parameterization errors when replacing sensors – the measurement setup is ready for operation via plug-and-play. The IFFDA93 handheld device and other measuring amplifiers from interfaceforce® eK support the TEDS standard and enable quick, error-free commissioning, even with frequent sensor replacements.

What are parasitic forces and how do they affect measurement?

Parasitic forces are unwanted shear forces, bending moments, or torsional loads that act on the sensor simultaneously with the actual measuring force and can distort the result. Even an angular deviation of 5° in the load application causes a systematic error. To minimize parasitic influences, interfaceforce® eK recommends using rod ends, pressure load buttons, and mounting plates – all available as accessories. The interfaceforce® eK team provides support for sensor selection and installation advice upon request.

What are the delivery times and can I order small quantities?

Standard models from Interface Inc. that are in stock are available for immediate delivery. Custom designs and customer-specific receivers are manufactured upon receipt of order; thanks to rapid prototyping, initial samples are often available within a few weeks. There is no minimum order quantity – orders are possible starting from a single unit. Inquiries and orders can be made via email (info@interfaceforce.de), telephone (+49 8022 271667), or the contact form on the website.

Synergy effects for the accurate measurement of OEM products and components

Interface thrives on close collaboration with its OEM partners. We control the entire process, from careful sensor design to robust packaging, but our true strength lies in the synergy we create with our customers.

The value of Interface for OEMs lies in the variety of custom-developed individual measuring devices and sensors that can be easily integrated into components or products. Interface OEM solutions refer to high-volume products that act as unique sensors for use in existing hardware Activation of a product or manufactured as an independent measuring component.

We offer a variety of strain gauge products, technical services and design capabilities to support manufacturers with customized solutions that meet their exact needs.

When is an Interface OEM solution required for your product or component?

#1 Accurate Measurement: With Interface load cells and transducers, OEMs can monitor and measure the forces acting on their parts and products in real time. The measurement data is critical for performance monitoring and ensuring that components and systems operate within safe and optimal load ranges.

#No. 2 Data collection and analysis: Interface sensor technologies provide valuable insights into product usage and performance. product developer benefit by understanding user behavior and making decisions about future product development. This data can also be used for predictive maintenance.

#3 Design Optimization: Analyzing real-time force data helps engineers optimize component and product designs. By understanding how forces are distributed and interact within a system, one can reduce material consumption and component weight without compromising strength. Product engineers must also identify and eliminate stress points to improve durability and longevity.

#4 Safety and Reliability: Force monitoring enables proactive safety measures that prevent accidents and equipment failures. The sensor data is valuable for preventing damage by stopping operations or triggering alarms when excessive forces are detected during operation.

#5 Quality control of products and components: The use of embedded sensor technologies is important to ensure consistent force-related performance during use.

Definition of the OEM solution

Speed meets precision as Interface has complete control over the sensor design. From the precision strain gauges to the storage and shipping of the parts, every step is in our hands - this means we can quickly develop our sensors and adapt them to your needs. Our dedicated engineers work with OEM partners to seamlessly integrate specific requirements into each sensor, delivering solutions as unique as your vision.

The Development of OEM solutions is a collaborative process in which our expertise comes into play. Before we define a measurement solution for your specific OEM needs, Interface engineers and application experts begin a detailed solution definition process between OEM team members. We host a series of system-level discussions that lead to maximum efficiency in design, construction and production.

The most important questions for discovering OEM solutions

What is the #1 challenge or problem you are trying to solve?
What do you want to measure?
Where should the sensor be used or placed?
Why are you interested in certain measurements?
What signal or connectivity is needed?
What are the defined measurement ranges and potential loading conditions?
How can the wrapping and mechanical integration best be described?
What are the environmental conditions and loads for the product or component?
What plans are there for sensor calibration?
Do you use relative or absolute measurements?

Interface's measurement products available to create a unique, OEM-only SKU include our load cells, miniature load cells and force switches, load pins, and torque transducers. OEMs can choose from Interface's extensive range of sensor solutions for specific force ranges, directions, mounting configurations and environments, allowing for optimal integration into their designs.

You are currently viewing placeholder content from YouTube. To access the actual content, click the button below. Please note that data will be passed on to third parties.

More information

Unlock content Accept necessary service and unblock content

Interface products available for custom OEM solutions

Low- and high-capacity low-profile load cells
Compression-only load cells
Miniature load cells
S-type and beam load cells, column and rod end load cells
Load cell load buttons
Sealed load cells
Stainless steel load cells
Multi-axis sensors
Torque transducer
Flange torque transducer
Hexagonal and square torque transducers
Load measuring pins and load shackle
Washers
Tension link load cells
Measuring devices

For products that require sensor-based components, interface products allow you to accurately and continuously measure force, weight or torque during use, meet safety requirements and certifications, and ensure product quality.

First, let us know your requirements by accessing our OEM solution request or contacting our experts. We are ready to help you produce sensor-based products.