What is the difference between a force transducer and a load cell?

Force transducers and load cells are based on the same measuring principle – the strain gauge – and convert mechanical forces into electrical signals. The term load cell is predominantly used in weighing and process engineering, while force transducers cover the broader spectrum of force and torque measurement technology: from test benches in the aerospace industry to materials testing. interfaceforce® eK distributes both types in measuring ranges from 0,5 Newtons to 30 Meganewtons.

What types of force transducers does interfaceforce® eK offer?

The portfolio includes low-profile force transducers, S-shaped force transducers, miniature force transducers, measuring bolts, force rings, bending beam load cells, cylindrical high-load sensors, and multi-component transducers for up to 6 degrees of freedom (6DoF). All standard models are strain gauge based and supplied with a calibration certificate. Custom designs are developed according to customer specifications.

Which torque transducers are suitable for rotating applications?

For rotating shafts, torque measuring shafts (e.g., T2, T4, T6, T8, T11, T22, T25) are available, which operate without contact and without slip rings. The measuring ranges extend up to 10 kN·m. For static or reactive applications – such as in test benches or for measuring bolt preload – reaction torque transducers are used. Both variants provide strain gauge-based signals and are compatible with the measuring amplifiers from interfaceforce® eK.

How does the XSENSOR pressure distribution system work and what is it used for?

XSENSOR systems measure surface pressure distribution using ultra-flexible sensor mats in various geometries and resolutions. These imaging systems deliver precise, reproducible results and are used in automotive and medical technology, biomechanics, and point-of-sale applications – for example, for seat pressure analysis, tire contact patch measurement, mattress diagnostics, and wiper testing. The XSENSOR laboratory is accredited according to ISO/IEC 17025 (A2LA).

What measurement accuracy do the force transducers from interfaceforce® eK achieve?

The low-profile force transducers of the Interface series (e.g., 1200, 1201, 3200) typically achieve a total static error band of ≤ 0,02% of the nominal value (full-scale output). The Gold Standard® and Platinum Standard® reference force transducers are suitable for calibration tasks according to ISO 376 Class 0,5. All sensors are supplied with a calibration certificate; A2LA-accredited certificates according to ISO/IEC 17025 are available upon request.

Does interfaceforce® eK also perform calibrations of third-party sensors?

Yes. The calibration laboratory of interfaceforce® eK is ISO/IEC 17025 accredited (A2LA and DAkkS mutually recognized within the framework of the ILAC MRA) and calibrates force measuring devices regardless of the manufacturer. Supported standards: ISO 376, DKD-R 3-3, ASTM E74, VDI/VDE 2624, and custom calibration procedures. Force measuring ranges: 0,5 N to 250 kN (tension and compression). An RMA number will be issued in advance for submissions; the delivery address for calibrations and repairs is c/o SETFLEX, Oppelner Str. 23, 41199 Mönchengladbach, Germany.

How does a calibration process work and how long does it take?

The process begins with an inquiry via contact form or email; interfaceforce® eK promptly issues an RMA number. Upon receipt of the device, calibration is performed in an ISO 17025-accredited laboratory using static tensile and/or compressive force measurements with traceable transfer standards (DAkkS, NIST, or PTB). Calibrations according to ISO 376 or DKD-R 3-3 include multiple load stages in various mounting positions. Turnaround times are short – precise details are available upon request. The completed calibration certificate is internationally recognized.

Which force transducers are suitable for use in ATEX or explosion-hazardous areas?

For hazardous areas (ATEX/IECEx), interfaceforce® eK offers force transducers from the 3400 series as well as hermetically sealed sensor variants made of stainless steel. These models are designed for harsh and potentially explosive environments and deliver reliable measurement results even under continuous operation. For specific hazardous area requirements (Zone 1, Zone 2, etc.), we recommend individual consultation, as suitability depends on the respective device category and the medium being used.

From what quantity are special solutions and customer-specific force transducers available?

Custom designs are available even for single units. interfaceforce® eK develops customer-specific force transducers, torque transducers, and multi-component sensors based on over 25 years of experience and in-house strain gauge manufacturing. Rapid engineering and rapid prototyping enable solutions to be implemented in short lead times – from concept to series production. Application areas range from niche markets with small production runs to OEM integrations in high-volume series.

What distinguishes interfaceforce® eK from other providers in force measurement technology?

interfaceforce® eK has been the exclusive distributor in Germany for Interface Inc. (founded in 1968, Scottsdale, USA) since 1999 – one of the world's leading manufacturers of precision strain gauge-based force transducers. The service portfolio combines American manufacturing quality with local support: an ISO 17025-accredited calibration laboratory in Germany (A2LA/DAkkS, ILAC MRA), manufacturer-independent calibrations and repairs, custom manufacturing starting from a single unit, and exclusive distribution of XSENSOR pressure distribution systems. Measuring ranges from 0,5 Newtons to 30 Meganewtons cover virtually every industrial force measurement application.

What output signal do the force transducers provide, and what measuring amplifier do I need?

Strain gauge-based force transducers deliver a bridge signal of typically 2 mV/V or 4 mV/V at rated load. Further processing requires a measuring amplifier that converts this signal into a usable format – e.g., 0–10 V, 4–20 mA, USB, IO-Link, or digital interfaces. interfaceforce® eK offers suitable measuring amplifiers as complete measurement chains: from simple digital displays (IFFDA93, IFFDA5) and 8-channel data acquisition systems (IFFBX8) to wireless telemetry systems (WTS). Sensors with a TEDS chip also enable automatic parameterization at the measuring amplifier.

What protection ratings (IP classes) are available for the force transducers?

Most standard models are designed for industrial use and achieve protection ratings of IP65 to IP67 (dustproof, protected against water jets and temporary immersion). Hermetically sealed versions made of stainless steel achieve IP68 and are suitable for underwater, cleaning, and outdoor applications under harsh conditions. Certified versions are available for use in potentially explosive atmospheres (ATEX/IECEx). The exact IP rating can be found in each product data sheet; interfaceforce® eK is available upon request to advise on application-specific selection.

How often should a force transducer be recalibrated?

There are no legally mandated intervals; however, ISO 9001, IATF 16949, and industry-standard quality assurance systems recommend annual verification. In practice, the interval depends on the intensity of use, environmental conditions, and the required measurement uncertainty. In safety-critical applications or after mechanical overload events, immediate recalibration is recommended. The interfaceforce laboratory performs manufacturer-independent recalibrations with short turnaround times – even for sensors from other manufacturers.

What is TEDS and what advantages does it offer?

TEDS (Transducer Electronic Data Sheet, IEEE 1451.4) is an electronic data storage device integrated into the sensor or connector that automatically transmits calibration data and sensor characteristics to the measuring amplifier. This eliminates manual input and parameterization errors when replacing sensors – the measurement setup is ready for operation via plug-and-play. The IFFDA93 handheld device and other measuring amplifiers from interfaceforce® eK support the TEDS standard and enable quick, error-free commissioning, even with frequent sensor replacements.

What are parasitic forces and how do they affect measurement?

Parasitic forces are unwanted shear forces, bending moments, or torsional loads that act on the sensor simultaneously with the actual measuring force and can distort the result. Even an angular deviation of 5° in the load application causes a systematic error. To minimize parasitic influences, interfaceforce® eK recommends using rod ends, pressure load buttons, and mounting plates – all available as accessories. The interfaceforce® eK team provides support for sensor selection and installation advice upon request.

What are the delivery times and can I order small quantities?

Standard models from Interface Inc. that are in stock are available for immediate delivery. Custom designs and customer-specific receivers are manufactured upon receipt of order; thanks to rapid prototyping, initial samples are often available within a few weeks. There is no minimum order quantity – orders are possible starting from a single unit. Inquiries and orders can be made via email (info@interfaceforce.de), telephone (+49 8022 271667), or the contact form on the website.

Force measurement enables precision drone flight images

Many of the largest outdoor events around the world use drone technologies equipped with LED lights that work in complete unison to create amazing performances. From coronations and holidays to international sporting events, these incredible illuminated aerial spectacles are growing in scope, design and capabilities.

The use of drones for flight demonstrations is on the rise. Drone swarms offer new opportunities for creating captivating light shows and visual displays that can accompany or even replace certain aspects of traditional fireworks displays. They offer a unique aerial perspective as they fly at different heights and angles. They can be programmed to create specific patterns, shapes and movements in the sky, allowing for more complicated and tailored displays. Drones can also be equipped with different lighting effects and colors, offering a wide range of visual possibilities.

Drone shows offer breathtaking images and add a new dimension to the visual arts in the sky; Nevertheless, security is a priority during development and use. Although drones can be programmed to fly predefined paths and perform certain maneuvers, it is important to ensure that they remain at a safe distance and do not cause risk or damage.

The safety and regulation of a flying object is determined by the location and the relevant authorities. With the increasing use of drones in the visual arts, testing and design is of utmost importance to ensure that these goals are achieved and standards are maintained in the interests of the manufacturer, operator and audience.

What role does the interface play? Sensor technologies play a large role in the production of drone and area displays, as force measurements are required in the development and evaluation of drones for takeoff, precision movements, lighting effects and descent. Interface's products are used by drone manufacturers to design these aircraft for various tasks, from delivering packages to testing engine torque and center of balance.

Because of Interface's experience in supplying aerospace, automotive and industrial automation instrumentation, we have a variety of load cells, miniature transducers and instrumentation solutions that are perfect for use in drones. Our wireless sensors and digital meters are particularly attractive to drone manufacturers because they eliminate the need for cables and facilitate real-world testing. For more specialized applications, Interface also offers custom solutions and can work with original manufacturers to understand their specific requirements and deliver a sensor suitable for those requirements.

Using drones to create light shows has become a safer and more environmentally friendly alternative to fireworks and is often used at large events across the country. When testing this type of drone, force sensors are used to ensure that they can handle the weight of the LEDs loaded.

Drone show application

Drone fireworks have become increasingly popular in recent years. Drone fireworks and light shows equip drones with LED lights that fly in synchronized patterns and light up the night sky. For the weight of the LED or the forces generated by fireworks explosions, a force measurement and monitoring system is required.

Interface struck four of its sealed Stainless steel miniature load cells WMC installed on the required propeller motors to measure the attached LED lights. Each cell was with one WTS-AM-1E Wireless Strain Bridge Transmitter Module tied together. The WMCs measure the weight of the LED lights to monitor weight shifts or uneven weight distribution. The data results were transmitted wirelessly via the WTS-BS-4 Wireless Base Station directly to the customer's laptop or to the WTS-BS-1-HA Wireless Handheld Display broadcast for several channels. The four WMC load cells measured and monitored the weight of the attached LED light and ensured the stability of the propeller motors when the drone was in the air performing the fireworks display.

Interface, a US manufacturer of force measurement solutions, will be closed on July 4th. We will resume our normal business hours the next day.