What is the difference between a force transducer and a load cell?

Force transducers and load cells are based on the same measuring principle – the strain gauge – and convert mechanical forces into electrical signals. The term load cell is predominantly used in weighing and process engineering, while force transducers cover the broader spectrum of force and torque measurement technology: from test benches in the aerospace industry to materials testing. interfaceforce® eK distributes both types in measuring ranges from 0,5 Newtons to 30 Meganewtons.

What types of force transducers does interfaceforce® eK offer?

The portfolio includes low-profile force transducers, S-shaped force transducers, miniature force transducers, measuring bolts, force rings, bending beam load cells, cylindrical high-load sensors, and multi-component transducers for up to 6 degrees of freedom (6DoF). All standard models are strain gauge based and supplied with a calibration certificate. Custom designs are developed according to customer specifications.

Which torque transducers are suitable for rotating applications?

For rotating shafts, torque measuring shafts (e.g., T2, T4, T6, T8, T11, T22, T25) are available, which operate without contact and without slip rings. The measuring ranges extend up to 10 kN·m. For static or reactive applications – such as in test benches or for measuring bolt preload – reaction torque transducers are used. Both variants provide strain gauge-based signals and are compatible with the measuring amplifiers from interfaceforce® eK.

How does the XSENSOR pressure distribution system work and what is it used for?

XSENSOR systems measure surface pressure distribution using ultra-flexible sensor mats in various geometries and resolutions. These imaging systems deliver precise, reproducible results and are used in automotive and medical technology, biomechanics, and point-of-sale applications – for example, for seat pressure analysis, tire contact patch measurement, mattress diagnostics, and wiper testing. The XSENSOR laboratory is accredited according to ISO/IEC 17025 (A2LA).

What measurement accuracy do the force transducers from interfaceforce® eK achieve?

The low-profile force transducers of the Interface series (e.g., 1200, 1201, 3200) typically achieve a total static error band of ≤ 0,02% of the nominal value (full-scale output). The Gold Standard® and Platinum Standard® reference force transducers are suitable for calibration tasks according to ISO 376 Class 0,5. All sensors are supplied with a calibration certificate; A2LA-accredited certificates according to ISO/IEC 17025 are available upon request.

Does interfaceforce® eK also perform calibrations of third-party sensors?

Yes. The calibration laboratory of interfaceforce® eK is ISO/IEC 17025 accredited (A2LA and DAkkS mutually recognized within the framework of the ILAC MRA) and calibrates force measuring devices regardless of the manufacturer. Supported standards: ISO 376, DKD-R 3-3, ASTM E74, VDI/VDE 2624, and custom calibration procedures. Force measuring ranges: 0,5 N to 250 kN (tension and compression). An RMA number will be issued in advance for submissions; the delivery address for calibrations and repairs is c/o SETFLEX, Oppelner Str. 23, 41199 Mönchengladbach, Germany.

How does a calibration process work and how long does it take?

The process begins with an inquiry via contact form or email; interfaceforce® eK promptly issues an RMA number. Upon receipt of the device, calibration is performed in an ISO 17025-accredited laboratory using static tensile and/or compressive force measurements with traceable transfer standards (DAkkS, NIST, or PTB). Calibrations according to ISO 376 or DKD-R 3-3 include multiple load stages in various mounting positions. Turnaround times are short – precise details are available upon request. The completed calibration certificate is internationally recognized.

Which force transducers are suitable for use in ATEX or explosion-hazardous areas?

For hazardous areas (ATEX/IECEx), interfaceforce® eK offers force transducers from the 3400 series as well as hermetically sealed sensor variants made of stainless steel. These models are designed for harsh and potentially explosive environments and deliver reliable measurement results even under continuous operation. For specific hazardous area requirements (Zone 1, Zone 2, etc.), we recommend individual consultation, as suitability depends on the respective device category and the medium being used.

From what quantity are special solutions and customer-specific force transducers available?

Custom designs are available even for single units. interfaceforce® eK develops customer-specific force transducers, torque transducers, and multi-component sensors based on over 25 years of experience and in-house strain gauge manufacturing. Rapid engineering and rapid prototyping enable solutions to be implemented in short lead times – from concept to series production. Application areas range from niche markets with small production runs to OEM integrations in high-volume series.

What distinguishes interfaceforce® eK from other providers in force measurement technology?

interfaceforce® eK has been the exclusive distributor in Germany for Interface Inc. (founded in 1968, Scottsdale, USA) since 1999 – one of the world's leading manufacturers of precision strain gauge-based force transducers. The service portfolio combines American manufacturing quality with local support: an ISO 17025-accredited calibration laboratory in Germany (A2LA/DAkkS, ILAC MRA), manufacturer-independent calibrations and repairs, custom manufacturing starting from a single unit, and exclusive distribution of XSENSOR pressure distribution systems. Measuring ranges from 0,5 Newtons to 30 Meganewtons cover virtually every industrial force measurement application.

What output signal do the force transducers provide, and what measuring amplifier do I need?

Strain gauge-based force transducers deliver a bridge signal of typically 2 mV/V or 4 mV/V at rated load. Further processing requires a measuring amplifier that converts this signal into a usable format – e.g., 0–10 V, 4–20 mA, USB, IO-Link, or digital interfaces. interfaceforce® eK offers suitable measuring amplifiers as complete measurement chains: from simple digital displays (IFFDA93, IFFDA5) and 8-channel data acquisition systems (IFFBX8) to wireless telemetry systems (WTS). Sensors with a TEDS chip also enable automatic parameterization at the measuring amplifier.

What protection ratings (IP classes) are available for the force transducers?

Most standard models are designed for industrial use and achieve protection ratings of IP65 to IP67 (dustproof, protected against water jets and temporary immersion). Hermetically sealed versions made of stainless steel achieve IP68 and are suitable for underwater, cleaning, and outdoor applications under harsh conditions. Certified versions are available for use in potentially explosive atmospheres (ATEX/IECEx). The exact IP rating can be found in each product data sheet; interfaceforce® eK is available upon request to advise on application-specific selection.

How often should a force transducer be recalibrated?

There are no legally mandated intervals; however, ISO 9001, IATF 16949, and industry-standard quality assurance systems recommend annual verification. In practice, the interval depends on the intensity of use, environmental conditions, and the required measurement uncertainty. In safety-critical applications or after mechanical overload events, immediate recalibration is recommended. The interfaceforce laboratory performs manufacturer-independent recalibrations with short turnaround times – even for sensors from other manufacturers.

What is TEDS and what advantages does it offer?

TEDS (Transducer Electronic Data Sheet, IEEE 1451.4) is an electronic data storage device integrated into the sensor or connector that automatically transmits calibration data and sensor characteristics to the measuring amplifier. This eliminates manual input and parameterization errors when replacing sensors – the measurement setup is ready for operation via plug-and-play. The IFFDA93 handheld device and other measuring amplifiers from interfaceforce® eK support the TEDS standard and enable quick, error-free commissioning, even with frequent sensor replacements.

What are parasitic forces and how do they affect measurement?

Parasitic forces are unwanted shear forces, bending moments, or torsional loads that act on the sensor simultaneously with the actual measuring force and can distort the result. Even an angular deviation of 5° in the load application causes a systematic error. To minimize parasitic influences, interfaceforce® eK recommends using rod ends, pressure load buttons, and mounting plates – all available as accessories. The interfaceforce® eK team provides support for sensor selection and installation advice upon request.

What are the delivery times and can I order small quantities?

Standard models from Interface Inc. that are in stock are available for immediate delivery. Custom designs and customer-specific receivers are manufactured upon receipt of order; thanks to rapid prototyping, initial samples are often available within a few weeks. There is no minimum order quantity – orders are possible starting from a single unit. Inquiries and orders can be made via email (info@interfaceforce.de), telephone (+49 8022 271667), or the contact form on the website.

Electrical engineers choose Interface Sensor Technologies

Interface is a leading provider of force, torque and weighing solutions to electrical engineers worldwide who are responsible for developing new products, solving problems and improving systems.

Depending on their specialization and industry experience, electrical engineers are responsible for the development and testing of electrical systems and components such as power generators, electric motors, lighting systems and production robots. They use their expertise and knowledge of electrical systems and components to design, develop, evaluate and maintain safe and reliable electrical systems. There are many electrical engineers who work on complex systems and are responsible for troubleshooting and diagnosing problems as they arise.

The electrical engineers, whose primary focus is research and development, work to develop new electrical technologies and improve existing systems. In projects related to renewable energy, smart grids, wireless communication systems and electric vehicles, all types of measurement solutions are used at all stages of research and development. Accuracy of testing is essential for electrical engineers to ensure components meet the Safety rules and comply with industry standards.

How does an electrical engineer use sensor technology for testing?

Sensors are an important tool for electrical engineers to test and optimize the performance of electronic devices, systems and processes. The type of sensor used and the specific testing application depends on the needs of the project or product, including the following examples.

Structural testing: Sensors are used to measure the structural integrity of materials and components. Load cells convert force or weight into an electrical signal that can be measured and analyzed. For example, Interface's standard load cells are often used to measure the strain or deformation of a material under load, which can help electrical engineers design stronger, more reliable structures. See how Interface's products were used in an EV battery structural testing project.
Process Control: Sensor technologies, including load cells and torque transducers, are commonly used in manufacturing processes to monitor and control various parameters. Electrical devices use this data collected through various measuring devices to ensure that the manufacturing process is operating within the desired parameters and to evaluate the process in terms of efficiency and Quality to optimize.
Environmental testing: Environmental sensors for measuring temperature, humidity, pressure and other environmental factors are widely used. Electrical engineers can use this data to test and optimize the performance of electronic devices and systems under various environmental conditions. Read Interface's solutions for hazardous environmentsto learn more.

Electrical engineers use load cells in a variety of applications, such as: B. to Measuring the weight of objects, to monitor the force exerted on a structure or to Controlling the tension in a cable or wire. The choice of load cell depends on the specific application and requirements for accuracy, sensitivity and capacity. Electrical engineers must also consider factors such as environmental conditions, installation requirements and cost when selecting a load cell.

Electrical engineers work in a variety of industries and sectors as their expertise is required in many different areas of technology and engineering. Interface has supplied high-quality test equipment and components to electrical engineers in everything from electronics to construction.

Electrical engineers in the electronics industry use interface products in the design and development of components such as microchips, sensors and circuits. The demand for intrinsically safe load cells and measurement devices comes from electrical engineers responsible for the design, maintenance and improvement of power generation and distribution systems, including renewable energy systems such as solar, wind and hydropower.

More than ever before in Interface's 55-year history, electrical engineers working on a variety of Aerospace and defense projects work, interface sensor products for the development and testing of avionics, communication and navigation systems.

We also offer electrical engineers specialized in the design and development of electrical and electronic systems vehicles - from powertrains and engine management systems to infotainment systems and driver assistance technologies - new and innovative force measurement solutions.

Manufacturing electrical engineers involved in the design and optimization of manufacturing processes and the design and evaluation of electronic components and systems in manufacturing plants often use interface sensors. This also includes the increasing need for sensors in the Robotic.

Electrical engineers in many different industries rely on Interface, just as all companies and organizations around the world rely on its expertise. Interface is a proud partner of engineers of all disciplines.